台板胶
Table-adhesive for printing YD-7002
产品成份Composition/Information On Ingredients:
高分子化学聚合物Macromolecule chemical polymer
主要质量指标Main quality indicators:
外观Appearance:白色细小固体Small white solid
固含量Polymer content:≥92%
产品特性Products especially:
适用于机器印花时固定织物,避免织物脱板移位,印花结束后易于清洗板面Applied to fixed table when machine printing, avoid fabric shift from table, easy-to-clean surface after the printing。
固体台板胶化料方法Solid particles dissolving method::
(举例125Kg台板胶化成625Kg台板胶溶液As an example: 125Kg particles dissolve to be 625Kg solution.)。
1. 先加入常温水300~400Kg,并开加热first joining 300 ~ 400Kg under water, and heating。
2. 再加入1Kg左右消泡剂,然后开搅拌,再加入固体台板胶125Kg
Add about 1Kg deforming agent, mixing them, then add the solid particles of 125Kg
3. 然后加入余量的水,升温至95℃~98℃,在搅拌下保温1.5小时左右。搅拌均匀即可出料
Add the rest water, heating allowance to 95℃~98℃, keep warm 1.5 hours under stir. Discharge after it is stirred evenly.
4. 如需再化稀,则再加入热水搅拌均匀即可,浓度视各厂情况而定
Add some allowance hot water and stir evenly if need further diluting, the concentration of solution depends on your need.
用法Usage:用刮刀或辊筒将台板胶溶液均匀刮在台板上,加热粘上织物即可使用
Using scraper or rollers to coat uniformly adhesive on the table surface, heat until it is sticky with the fabric.
包装packing:25Kg/袋
25kg/bag, 20 bags in one pallet.
注意事项announcements:
本产品资料只供参考、研究和鉴定,本公司并不承担由此所引起的责任和专利纠纷。
※TDS only for references, researching and identification. The Company is not liable for patent dispute arising.
|